The purpose of customizing industrial casters is to facilitate transportation. For example, it is used for indoors, various equipments that need to be transported in buildings, and various types of handling machines. Observe the following principles: The selected industrial casters should be properly used and properly installed according to the method and conditions of their use.

    When using industrial caster customization, it is desirable to anticipate the way it is used, the functions required, the conditions of use (the scope of use), and then select the appropriate type. Please note the following:

1、 Appropriate load bearing load 

The possible load-bearing load of the product introduction refers to the general load-bearing capacity that is easy to move when transported on a flat ground by manual operation, and the long-term carrying of such a porter in a safe state. For the general load, it is necessary to estimate the total weight of the carrying object in advance, and then select the appropriate industrial caster for the required load. Usually appear in 4 industrial casters There are only three cases in the system, so the weight limit of the total weight should be based on the theoretical *0.8 (that is, not too full).

2、 About speed 

    The requirements for the custom speed of industrial casters are: in normal temperature environment, at a height of not higher than walking speed, on a flat ground, there is a general use situation of a certain working state. (please Avoid continuous (non-stop) use of custom casters for industrial casters)

Industrial caster custom wheel diameter 75mm or less ------ 2 km / h or less

　　　　　　 Below 100mm ------ 4 km / h or less

    The purpose of customizing industrial casters is to facilitate transportation. For example, it is used for indoors, various equipments that need to be transported in buildings, and various types of handling machines. Observe the following principles: The selected industrial casters should be properly used and properly installed according to the method and conditions of their use. When using industrial caster customization, I hope to consider it in advance How to use, the required function, the conditions of use (scope of use), and then choose the appropriate type. Possible load-bearing load is easy to move when transported on a flat ground by manual operation. The general load-bearing capacity is a general load that can carry out such handling work in a safe state for a long time.

   At the same time, continuous (non-stop) use of custom casters for industrial casters should be avoided. Determining the wheel diameter of industrial casters according to the specific equipment customized for the installation of industrial casters , its material, installation method and the type of customization using industrial casters. Due to the long-term use, industrial casters can be customized, and the industrial caster customization function is reduced. Keep an eye out for it. Under normal circumstances, the hard industrial caster customization will be reduced in terms of its anti-rotation effect after a period of use.